Tag Archives: Submersible Slurry Pump

02Jul 2020

DCYZ series explosion-proof submersible pump for your choose

⋅ Leave a Comment

DCYZ series explosion-proof submersible pump is applicable to dangerous sites which contain methane, coal-dust explosion environment,also application for transporting rain water and sewage containing solid particles at constructions, hospitals, residential areas, municipal projects, roads, factory sewage, etc.

SONY DSC

Outstanding Features:

1.Model special features: Optimised performance, smooth and reliable operation without blocking, strong sewage desilting capacity, no overload throughout whole head range, input power does not exceed the matching motor power under any condition. Applicable for various occasions under mine, one equipment serves multi-purpose operation.
2.Mechanical seal improvement: Utilises independent cascade mechanical seal and double-end faces mechanical seal.
3.Optimised structure: Structural design promotes mechanical sealing, smooth operation, high reliability; optimised design, portability and practicality, low energy consumption, long time operation under no water condition.
4.IP×8,IP68 motor protection grade, good submersible motor cooling performance, operating temperature is lower than that of other motors, improved durability. F grade insulation gurantees longer service life of motor.

SONY DSC

Application used;

DC Submersible slurry pump is centrifugal pump.
DC Submersible slurry pump can be treated as shale shaker feeding pump.
DC Submersible slurry pump is vertical type save much space. Furthermore, it also can be decanter centrifuge feeding pump.
DC Submersible slurry pump impeller is semi opening type this provides high efficiency. The impeller material is carbide alloy make pump more durable decrease maintenance cost.

If you have any requirements please contact DC office freely.

18Feb 2020

DCYZ Series Submersible slurry pump from DC Solid control

⋅ Leave a Comment

DCYZ series submersible slurry pumps are mainly used for environmental protection, new type building materials , coal washing , municipal projects, thermal power generation, coal gas coking plant,refinery,steel mills,mining,paper
making,cement plant,food products factory and other fields to perform pumping of thick oil, oil residue, dirty oil, mud, mortar, running sand and other liquids from the municipal sewerage. Vertical slurry pump is also suitable for
pumping liquids with silt particle and corrosive liquid.

slurry pump

The submersible slurry pump consisting impeller, pump case, pump shaft, bearing, driven power, supporting frame, coupler, shaft sleeve, shaft seal, and so on. Usually, we use the electrical motor drive pump. The popular pump flow rate is from 30m3/h to 200m3/h.

slurry pumps

The characteristics of Submersible Slurry Pump by DC:
1. The pump shaft under the liquid has enough rigidity. No bearing is set between impeller and pump.
2. Shaft seal is not adapted, the medium with dense solids can also be transported.
3. The submersible slurry pump may penetrate the liquid between 800m-2500mm under it, and may be equipped with suction pipes if necessary.
4. Vertical motor is installed on the motor base, connected to the pump by coupling.

DC is a professional oilfield drilling submersible slurry pump manufacturer supplier and manufacturer in China oil drilling mud solids control industry. The products we can provide for oilfield and drilling fluid processing system includ

 

13Nov 2019

Buy solid control Submersible slurry pump from DC Company

⋅ Leave a Comment

Submersible slurry pump normally used for feeding shale shaker for CBM, HDD or other drilling industry. It is vertical single stage and single suction system and made of abrasion-resistant alloy. The standard length of pump 1 3m but can be customized.

pump

Submersible Slurry Pump is designed for pumping the liquid mud while wells drilling. And it can be used as a charging pump for the main mud pump. Increased capacity allows significantly reduce pumping time. Specially designed pump frame, adapted to drilling rig, enables it to vertical movement of working part, thus providing for serviceability and checkup. The bottom part of the shaft has enough rigidity; pump impeller is set between bearings. It can supply the liquid with strong concentration of solid particles. The submersible slurry pump may penetrate the liquid between 800m-2500mm under it, and may be equipped with suction pipes if necessary.

submerisble pump

Actually, the pump is one kind of Centrifugal Pump. As submersible slurry pump is mainly transferring liquid and solid mixture, the pump raw material is rather anti- abrasive. It can transfer different hard materials. Including sand, cement, particles, shale, and so on.

The submersible slurry pump consisting impeller, pump case, pump shaft, bearing, driven power, supporting frame, coupler, shaft sleeve, shaf seal, and so on. Usually, we use the electrical motor drive pump. The popular pump flow rate is from 30m³/h to 200m³/h.

Buy submersible slurry pump from China manufacturer, DC Solids Control system submersible slurry pump.Mud tank submersible slurry pump.Your best submersible slurry
pump for drilling mud circulation system and decanter centrifuge feeding.

 

21Jun 2019

DCYZ series submersible slurry pump structure and application

⋅ Leave a Comment

Submersible Slurry Pump is designed for pumping the liquid mud while wells drilling. And it can be used as a charging pump for the main mud pump. Increased capacity allows significantly reduce pumping time.

Our DCYZ series submersible slurry pump  mainly supply mud for shale shaker and decanter centrifuge from the mud pit. Its structure is single sucking cantilever type, and uses bearing seat, supporting seat and pipe to connect the hydraulic parts of pump, and liquid is discharged from the hydraulic hose assembly. Pump’s impeller is semi-open type, and it’s equipped with mixing blade in the stretch part of impeller inlet.

Submersible slurry pump

Specially designed pump frame, adapted to drilling rig, enables it to vertical movement of working part, thus providing for serviceability and checkup. The bottom part of the shaft has enough rigidity; pump impeller is set between bearings. It can supply the liquid with strong concentration of solid particles. The submersible slurry pump may penetrate the liquid between 800m-2500mm under it, and may be equipped with suction pipes if necessary.

Slurry pump

DCYZ series submersible slurry pump is currently used in city bored piling, tunnelling construction, trenchless HDD, oil & gas drilling, Drilling Waste Management, environment protection, Coal Bed Gas Solids Control System, Water Drilling, Oil Sludge Dewatering Systems, Oil Mud Seperation, coal washing, municipal projects, thermal power generation, mining, paper making, cement plant etc.

08Sep 2017

18 sets slurry pump shipped to Russian today

⋅ Leave a Comment

Submersible slurry pump is a kind of centrifugal pump which is usually used as feeding pump for centrifuge, desander, desilter or shale shakers. Today, DC solid control company shipped 18 sets DC100YZ100-30 slurry pump to Russian.

DCYZ Series pump is horizontal single stage end suction with single casing slurry pump,it adopts to dredging project.with wide passage and good suction ability. The wet parts is high-hardness material,it has interchangeable hard metal or pressure moulded elastomer liners.

IMG_5247

The discharge branch of DCYZ slurry pump can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.

The submersible slurry pump may be used for liquid deeps 800~3000mm. it can be equipped with extension suction pipes if necessary. Please contact DC Solid control for more detail or you have any demand. Trust you’ll get best price with high quality items.

20Feb 2017

Main advantages of DCYZ Slurry pump structure

⋅ Leave a Comment

DCYZ Slurry Pump is the cantilever pump structure of single stage and single suction, with the bearing housing, supporting, intermediate pipe connecting the pump hydraulic components, the water is discharged out from the drain pipe parts, pump impeller is for semi-shrouded with the agitating vane on the vane extended.

slurry pump

Advantages of DCYZ Slurry pump structure:

Impeller: There are open, semi-open, full closed three. With a leaf-lane wide, leaves small and so on. Fluid leakage loss, through the good, high efficiency, without clogging.

Pump Cover: with 2 oil seal and a seal set, has opened three relief holes, the pump can reduce the leakage losses prate. Can they prevent high pressure water toward the bearing affect the bearing life.

Shaft: High quality carbon steel. Stent: The vertical motor connections. The pump can be vertical or inclined to use, the body must be buried in the working medium, do not need to advance water, gas discharge and so on.

DC Solid control company has the complete service, such as OEM order is accepted, we help to select the right pump, interchangeable rubber and metal design,  After-sales service and large stock. We provide lifetime after sale service.Welcome to customize pumps with our factory or buy the finished vertical drilling submersible mud pump fluid equipment with us.

20Mar 2015

Submersible slurry pump used in HDD industry

⋅ Leave a Comment

In the solids control system,there are many pumps for deliver drilling fluid from a solids control equipment to another. The mud pit holds sufficient drilling mud when driller begin drilling, sometimes we need submersible slurry pump feed mud to shale shaker.

submersible slurry pump

A submersible pump is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation difference between pump and the fluid surface. Submersible pumps push fluid to the surface as opposed to jet pumps having to pull fluids. Submersibles are more efficient than jet pumps.

Slurry pump can not only used in oil& gas drilling industry, but also widespread used in HDD industry.

Different HDD hold different treating capacity and requirements on submersible slurry pump. Usually there will be followings to be contained. Such as, 80YZ50-10, its capacity is 50~60m3/h as feeding pump for 100t HDD holds 200GPM mud system. Then 100YZ100-30 for 200t, 300t, 450t HDD system. Of course, depends on various HDD the submersible slurry pump will require different power to match treating capacity demand.