Tag Archives: Solid Control System Manufacturer

Solid control system is a very important part for a oil and gas drilling field. Last year, DC Machinery delivery a set of ZJ2000 drill rig solid control system to Egypt. And yesterday, we delviery a set of spare parts to match the solid control system.

DC Machinery supply a complete line of spare parts for solids control equipments like shaker screen, Desander cone, Desilter cone, pump, vibrator motor, bearing, oil seal, gear box, impeller, wedge, butterfly valve, etc.


Solids control spare parts are the wearing parts for solids control equipment. From shale shaker, mud cleaner, centrifuge, to the cuttings dryer, screw conveyor. From the shaker screen, hydrocyclones, to the bearings, gear box, motors, and so on.


DC supply the complete line solids control parts. Please find below popular parts from DC.

1. The shaker shale shaker screen, vibration motor, springs, wedge blocks, etcetera for shale shakers;
2. The 4”desilterhydrocyclones, the 10”desanderhydrocyclones, clamps, nozzles, and so on for mud cleaner;
3. Motor, gear box, oil seal, bearings, for mud agitators;
4. Pump head, mechanical seal, impeller, shaft, gasket, O rings, etc., for centrifugal pump;
5. Venturi mixing hopper for jet mud mixer;
6. Flanges, valves, unions and other fittings for mud tank;
7. Screen basket for vertical cuttings dryer.

Please contact us if you need any solid control spare parts, I am very glad to quote for you.

The process of drilling and completing coalbed methane (CBM) wells is similar to wells in conventional reservoirs. Coring, however, can pose special challenges.

CBM wells range in depth from a few hundred meters to more than 3000 m. As a result, several rig types and sizes may be suitable for a given well plan. The most common rig type is the conventional rotary drilling rig, although modified water-well rigs commonly are used to drill shallow coal wells in locations such as the Powder River basin of Wyoming. Show that CBM drill is similar with Petroleum drilling to use the mud, but the is very expensive, so we must recycle and reuse.


And as a professional manufacture in China, we can design and manufacture a set of mud cleaning system for CBM, the main equipment consists of shale shaker, desander, desiter, decanter centrifuge, mud agitator, centrifugal pump and mud tank.

The CBM mud cleaning system is an obligatory constituent part in the modern well drilling equipments, it can content the normal cycle and stable property of the mud in the drilling process, ensure the task of well drilling under the premise of safety, environmental protection and high efficiency.

mud cleaning system

The drilling mud recycling system developed independently by Tangshan Dachuan Machinery Co., Ltd is applied to the whole process of CBM well drilling. This system can effectively control the solid phase content of mud between 5μm~15μm in the process of CBM drilling, and at the same time matching mud parameters ratio, promote drilling mud quality, the mud viscosity ratio can be up to 120s and mud density can be 2.4g/cm3.

So if you focus on CBM and have some requirements of the whole set mud cleaning system please contact us, believe we can provide you the perfect scheme to cleaning the mud and protecting the environment.