Tag Archives: Mud Tank Supplier

A drilling rig normally has two tanks. A tank is sectioned off into compartments. A compartment may include a settling tank, sometimes called a sand trap, to allow sand and other solids in the drilling fluid to precipitate before it flows into the next compartment. Other compartments may have agitators, which are large fan blades stirring the fluid to prevent its contents from precipitating.

mud tank

To be as a professional manufacturer of drilling mud system. DC Solid control can design and manufacturer all kinds and volume mud tanks according to users’ request. Mud tanks are the base of solids control equipment.

tanks

Mud tanks for solids control systems are divided into Square tanks and Cone-shaped tanks according to the shape of the tank bottom. The body of the tank is made by welding the steel plate and section, using the smooth cone-shape structure or the corrugated structure. The mud tank surface and passages are made of slip resistant steel plate and expanded steel plate. The mud tanks are made of the side steel pipe. All of the structure can be folded without barrier and pegged reliably. The surface of the tank is equipped with a water pipeline for cleaning the surface and equipment on the tank, it uses soaked zinc processing for the expanded steel plate. The ladder is made of channel steel to take responsibility the body, the foot board is made of expanded steel plate. The two-sided guard rail are installed the safe suspension hook. The mud tank is designed the standard shanty to prevent the sand and the rain. The pipeline is installed in the tank to preserve the warm air heat.

Mud tank quantity depends on mud process capacity requirements. Especially for mud storage, suitable for mud pump, drilling rig, etc. If you have request please contact us freely.

DC solids control designs and manufactures various types of tank including mud tank, water tank, oil tank, etc.  DC solid control mud tanks are usually used to install solids control equipment, storage mud, mixing mud, etc. It meets utility request of the drilling solid control system, mud plant and solid-liquid separation system. According to different working conditions, mud tanks can be customized into horizontal mud tank, vertical mud tank and trailer mounted mud tank.

SONY DSC

Mud tank flow line

The drilling mud tank is normally configured with mud suction line, clean water line and mud gun line, and mixing tank with mud hopper mixing line. Heating line can be added for freezing cold working environment.

Mud tank common material

Plate material, hot rolled bars and sections material and flange bolt / nut material are all sourced for top rated manufacturers and compliant to international standards.

SONY DSC

Painting/protective coatings

Surface preparation: Sand blasting / shot blasting; prime coat specification / dry film thickness: 50 µm; intermediate coat / dry film thickness: 80µm; finish coat / dry film thickness: 50µm. Final colors is customizable.

DC Solids control manufacture mud tank for our own fluids processing system but also we supply mud tank with customized desgin.We are located in China iron production City-Tangshan.The price of raw material here is very low and with high quality.There are also many experienced workforce in iron machine production.

DC Solid control machinery offers a wide variety of oilfield Mud Tanks at competitive prices. The specifications for the Mud Tank that you are viewing are below: * 200 barrel * 3 runner oilfield skid * 4″ & 6″ suction * 6′H x 7’11″W x 30′L. We also design and manufacturing the mud tanks according to your special request.

SONY DSC

The mud tank is to store the drilling mud for circulation, and the solids control equipment is for cleaning the drilling solids, mixing drilling mud, or agitating the drilling mud. The mud tanks design including the construction of the mud tanks, selection of the solids control equipment, layout of the pipelines etc.

SONY DSC

Mud tank types in the Solids Control system:
No. 1 Mud tank is normally the Shale Shaker tank ( Sometimes there is an extra small tank which called trip tank will the No. 1 tank)
No. 2 Mud tank is the active mud tank.
No. 3 Normally is the mud suction tank for the suction of mud pumps.
No. 4 Mud tank is the mud mixing tank

DC Solid control company designed mud tanks for oil gas drilling, and also the CBM and HDD drilling application, with the sales of mud tanks to over 20 countries, DC Solids Control have the capability to design the customized mud tanks suits for all your application for the drilling.

Drilling cutting boxes are a kind of tank to contain drilled solids in well drilling. Both for onshore and offshore o&g drilling. According to 7 month communication, DC Solid control fincialy got the bider of 40 sets drilling cutting box at Aug. And adter 15 dasy production, we have already finished the production period.

SONY DSC

The cutting boxes are usually rectangular tanks. They can be configured on typical oilfield 3-leg mounted skid, can be common container shape, or the traditional roll off. They are always open top for convenient materials handling, furthermore, they are water tight type without leakage.

SONY DSC

The cuttings tank certainly can be designed variously as the clients’ demand vary much. But the bottom and general dimensions are same. For example, the tanks can be designed with corrugated plate thicks 8mm. Another proposal is the tanks designed with wall thicks 6mm. And the height can be different. For example, we Aipu produce mainly 2 model drilling cutting box. One is 2000x1600x1060mm, another is 3300x1600x1650mm.

The 40 sets cutting box will be used on offshore rig. All items in this order should be produced with same specs and standard. Another request is the CCS Certificate of offshore drilling cutting box.

 

Yesterday, DC solid control welcomed the distinguished clients from Mexico. This is the firt time they come to China, also is the fisrt time to cooperate with China supplier. We felt very appreciated to be your fisrt business partner.

The first order from the famous CBM company is 3 sets mud tanks used in their active site. According to 15 days production, the company marketing manager and senior engineer came to our factory to see our manufacturing process. They were very satisfied with the tank, especialy in each small points. They said will building long terms business cooperation with DC solid control. Meanwhile, the clients said, they were very lucky to find our to be their China supplying base.

mud tank

The body of the tank is made of welding the steel plate and section, using the flat cone-shape structure or the corrugated structure. The mud tank surface and the passage are made of the slipping resistant steel plate and linearity netted steel plate which is produced by the professional factory, the mud tanks are made of the side steel pipe, all of the structure can be folded without barrier and pegged reliably.

The surface of the mud tank is equipped with water pipeline for cleaning the surface and equipment on the mud tank, we use soaked zinc processing for the netted steel plate.

mud tanks

The ladder is made of the channel steel to take responsibility the body, the foot board is made of the linearity netted steel plate. The two-sided guard rail are installed the safe suspension hook. The mud tank is designed the standard shanty to prevent the sand and the rain. The pipeline is installed in the tank to preserve the warm air heat.

Buy Mud tank from us you will enjoy high quality but Good price.We are professional in manufacturing solids control system,so our mud tanks design are very compatible for mud circulation system using.

 

According to 3 months manufacturing and 45 days transportation. The mud tanks already got to Poland drilling site yesterday. We manufacture 5 sets customized mud tanks for the clients. We shipped the mud tanks to Xin Gang port after inspection by the client.

Mud tanks are divided into square tanks and cone-shaped tanks according to the shape difference of the tank bottom. The tanks are generally open-top and have walkways on top to allow a worker to traverse and inspect the level of fluids in the tanks. The walkways also allow access to other equipment that are mounted on the top. Recently, offshore drilling rigs have closed-in tanks for safety.

mud tanks

The mud tank plays a critical role in mechanically removing destructive solids and sediment from costly land and offshore drilling systems.

DC Solid control design and manufacture the complete mud tank separation systems for all types of drilling applications. Qualified Manufacturing ! Professional ! Reliable !

A mud tank is an open-top container, typically made of steel, to store drilling fluid on a drilling rig. They are also called mud tank mud pits, because they used to be nothing more than pits dug out of the earth.

IMG_2378

We delivery 5 big mud tanks to XinGang Port this month, which is used for oil&gas drilling field. Following is the details of the 5 big mud tanks:

The mud tank surface and the passage are made of the slipping resistant steel plate and linearity netted steel plate which is produced by the professional factory, the mud tanks are made of the side steel pipe, all of the structure can be folded without barrier and pegged reliably. The surface of tank is equipped with water pipeline for cleaning the surface and equipment on the mud tank, we use soaked zinc processing for the netted steel plate. The ladder is made of the channel steel to take responsibility the body, the foot board is made of the linearity netted steel plate. The two-sided guard rail are installed the safe suspension hook.

IMG_2379

DC Solid control company offers prospective buyers and extensive selection of quality new oil & gas drilling equipment, including mud tanks to choose from at competitive prices. Browse our inventory of drilling mud tanks and oilfield tanks for sale at competitive rates.

A fluid tank is an open-top container, typically made of steel, to store drilling fluid on a drilling rig. They are also called mud pits or mud tanks. The tanks are usually open-top and have walkways on top to allow workers to inspect the fluid levels in the tanks. Other equipment is often mounted on top and the walkways allow access to that equipment. Recently, offshore drilling rigs have closed-in tanks for safety.

mud tanks

A drilling rig normally has two mud tanks. One tank is sectioned off into compartments that may include a settling tank, or sand trap, to allow sand and other solids in the drilling fluid to precipitate before flowing into the next compartment. Other compartments sometimes have agitators used to stir the fluid.

Mud tanks for solids control systems are divided into Square tanks and Cone-shaped tanks according to the shape of the tank bottom. The body of the tank is made by welding the steel plate and section, using the smooth cone-shape structure or the corrugated structure.

DC Machinery supplies good quality solids control mud tank with best price. We can made it according to your special requirements. Welcome to contact us and get the best solution for your work!

Mud tank is the petroleum drilling solid control equipment, it mainly including FG and ZG type of  oil drilling mud tank. But different drilling field with the different well should match the different size mud tanks. So according to drilling field covering requirements to divided into the rectangular tank and tapered shaped tank.

Structure of mud tank 

The tank body uses the antiskid steel and anti-skidding bar-type halftone, the tank surface railing use the square steel tube manufacturing, it is the barrier free and collapsible structure. The peg graft is fastness. Mud tank circulating tank surface equipped pure water pipeline to wash the tank surface and equipment. Tank surface halftone use zinc immersion processing. The upper ladder use the U-bar as the main body, the anti-skidding bar-type halftone as the footstep, bilateral guardrail equipped the insure pothook.

Requirements for anticorrosion 

The tank surface all use derusting by sandblast technology eliminate surface rusting and dirt.

The painting is ocean paint (epoxy zinc-rich paint)

Mud tank matched equipment

Usually the mud tank should matched drilling fluid shale shaker, vacuum degasser, desander, desilter, mud cleaner, mud gas separator, mud agitator, centrifugal pump, shear pump, centrifuge, flare ignition device, slurry and mud gun. Meanwhile these equipment combine a complete solid control system.