Tag Archives: Mud Gas Separator Supplier

11May 2023

Another Order of ASME Certificated of Mud gas separators shipped to Indonesia

⋅ Leave a Comment

ZYQ series Mud gas separator(Poor Boy Degasser) is professional equipment to treat the gas invade mud. When the drilling mud result gas invade, the proportion of its weight and viscosity have a greater deviation not to meet the requirements of drilling.

liquid gas separators

To be as a professional manufacturer of solid control manufacture, DC Solid control got another order of mud gas separator at the end of April. According to users’ request the order need the ASME Certificated, so all the welding process and material with much higher standard.

mud gas separators

The end result is this the clients were very satisfied with the quantity and our professional service. Above picture is the delivery picture for reference.

Buy Solids control Mud gas separator for solids control system,drilling fluids,well drilling solids control Mud gas separator from China manufacturer

 

29Apr 2022

Specific Mud gas separator shipped to Indonesia

⋅ Leave a Comment

Drilling fluid mud gas separator is a special equipment of gas cut drilling fluid primary degassing, it is mainly used to eliminate the bubbles which the diameter is about 3-25mm.

The big bubbles is aiming at the expansion gas which is fully the borehole, if it is not eliminated, it will causes the well kick even spurt the surface of drill plate. The equipment uses the prevent sulfur material and adapts the gas with H2s processing.

SONY DSC

Installation and maintenance

Install

It is installed ground side of the circulation tank, use steel wire ropes fixed gas liquid separator with the ground.

Maintain

1Before using, we should check the bottom buffer baffle, if attrition more than 10mm, it must be replaced the two baffles at the same time.
2After using we should keep the separator empty and open the washing month and clean it.

DC Solid control is a professional manufacturer of solid control equipment. We can supply all kinds of mud gas separator such as DCZYQ800, DCZYQ1000, DCZYQ1200.

01Sep 2020

Professional manufacturer of DCZCQ Poorboy degasser

⋅ Leave a Comment

Poorboy degasser also called mud gas separator that is an ideal for use where drilling is likely to encounter large volumes of gas. The technology is especially beneficial in sour gas environments or when drilling with an underbalanced mud column.

To be as an professonal producer of drilling fluid circulation equipment, DC Solid control has many differnt models of mud gas separator for sale, such as ZCQ800, ZCQ1000, and ZCQ1200. Differnt types with differnt treating capacity that according to your actual use to proposal.

SONY DSC

Each mud gas separator has limitation on much it can safely handle volume of gas. If the volume of gas exceeds the maximum limit, gas can blow through into the rig. It is very important that you must estimate gas flow rate on surface based on pit gain and kill rate in order to see how much expected gas on surface. This will be the limitation on how much you can circulate for well killing operation. You can estimate the volume gas on surface by using well control kill sheet provided by several companies. You need to ensure that the vent line should be as straight as possible with a larger ID in order to minimize back pressure while venting the gas out.

SONY DSC

Anything that you don’t understand, please contact us to learn more about how to calculate the gas volume of your drill rig. And welcome to your valued inquiry of mud gas separators.

 

31Mar 2020

4 Set ZYQ1200 mud gas separator shipped to Indonesia

⋅ Leave a Comment

DC got a tender order from Indonesia who are our old clients last week. The order is 4 sets ZYQ1200 Mud gas separator. ZYQ series Mud gas separator(Poor Boy Degasser) is professional equipment to treat the gas invade mud. When the drilling mud result gas invade, the proportion of its weight and viscosity have a greater deviation not to meet the requirements of drilling.

Main Specification of the ZYQ1200 Mud gas separator:

mud gas separator

Features and Benefits of Mud Gas Separator:

1. Material: SS304 or Q345 from BAOSTEEL for body .
2. The whole body: The mud gas separator with the process of the grinding, sand blasting,the 3 layers of painting: epoxy zinc painting as the primer, the epoxy
painting as the middle coating, and the polyurethane for the final painting.
3. Separates and discharges the enormous free gas from drilling fluids, including poisonous gases like H2S.
4. Separated gas is carried by discharge lines to a safe area for combustion.
5. The unit is ruggedly built and coated with anti-corrosion epoxy so as to ensure long service life when processing hazardous and toxic gases.

mud gas separator5

DC Solids Control designs and manufactures ZYQ Mud gas Separators. Mud gas Separators is an extremely reliable, vital piece of safety equipment for today’s drilling operations. It is ideal for use where drilling is likely to encounter large volumes of gas, sour gas or when an operator is drilling with an under balanced mud column.

DC Solid control can supply ZYQ600, ZYQ800 ZYQ1000 and ZYQ1200 mud gas separator according to different users requirements. So please contact me if you have any requirements.

17Apr 2019

Examine cargo of mud gas separator in DC Solid control factory

⋅ Leave a Comment

Yesterday, the clients from Indonesia got to our factory to check the mud gas separator and are very satisfied with the quality and delivery time. This is the first time to cooperate with this clients who is a trade company in Indonesia.

The Mud Gas Separator has been designed to capture and separate large volume of free gases within the drilling fluid. Designed for high pressure wells, this unit control the circulated gas to the surface separating the gas from the mud and vent it.

liquid gas separator

DCZYQ series Mud gas separator(Poor Boy Degasser) is professional equipment to treat the gas invade mud. When the drilling mud result gas invade, the proportion of its weight and viscosity have a greater deviation not to meet the requirements of drilling.

mud gas separator

The serious situation is that would cause Chung well, and even blowout accident occurred, if not to treat it timely. ZYQ series Mud gas Separator combined with the Electric Ignition Device can be used to ensure the drilling process smooth. It is divided into the normal pressure Mud gas separator and pressure auto-control Mud gas separator, according to the pressure.Mud gas Separator is your best choice to prevent drilling mud invasion.

17May 2018

ZYQ series Mud gas Separator worked in Oilfield

⋅ Leave a Comment

The mud/gas separator is designed to provide effective separation of the mud and gas circulated from the well by venting the gas and returning the mud to the mud pits. Mud gas separators in other countries also called Poor boy degasser,Liquid-gas separators, Mud/Gas Separators, etc. Mud gas separator located at downstream of the choke manifold is one of the important well control equipment that you need to focus.

mud gas separator

Features

High efficiency and easy to maintain
Large capacity
Easy transportation and installation.
Maximizes free gas/mud separation
Unique U-shaped tube design eliminates moving parts and ensures a positive fluid seal, maintaining safe mud levels
Efficient baffle arrangement to easily separate gas from fluid
Available in varying sizes and lengths, accommodating any volume of fluid with high concentrations of gas
Heavy-duty steel construction and adjustable mounting skid for any rig

ZYQ series Mud gas Separator combined with the Electric Ignition Device can be used to ensure the drilling process smooth. It is devided into the normal pressure Mud gas separator and pressure auto-control Mud gas separator, according to the pressure.Mud gas Separator is your best choice to prevent drilling mud invasion.

Buy Solids control Mud gas separator for solids control system,drilling fluids,well drilling solids control Mud gas separator from China manufacturer.

28Feb 2017

Supply detailed of ZYQ Mud gas separator

⋅ Leave a Comment

DC mud gas separators are designed to provide safe drilling procedures during horizontal, underbalanced, h2s, or high pressure drilling. Our gas buster captures and separates the mud/gas then safely vents free gas to the flare line to be burned off while returning mud to the mud pits.

Our Mud gas separators are intended to sustain safety for high pressure wells or when sour gas may be present. Our units are closed bottom skid mounted model designed around safety and precision. Uniquely designed baffles break up mud and gas which is then expelled by the gas vent line to the flare line.

SONY DSC

DC Solid control manufacture numerous size specifications including ZYQ800, ZYQ1000 and are capable of producing vessels of all sizes. DC Gas Busters have a 12” inlet from flow line, 12” gas vent line to flow line, 12” return line, and 20” manhole. If necessary these lines can be modified with flanged concentric reducers to your desired piping size. The run of the gas vent line continues to ground level for safe and efficient hook up to the flare line piping.

DC’s Mud Gas Separator has a lot of advantages including reliable safety, better treatment effect, long service life, etc. DC use high quality steel materials manufacturing normal pressure prevent H2S Mud Gas Separator,can effectively prevent the harmful gas erosion, ensure the man- machine safety production.

11Nov 2013

Drilling mud gas separator produced by DC Solid control

⋅ Leave a Comment

Being the first professional manufacturer of Solid Control System in China, DC is a vital part of the world’s hydrocarbon exploration and production industry, as well as one of top three solids control equipment suppliers in China.

DC solids control equipments & systems, DC waste management equipments play important roles in rigs for drilling and serving Oil-Gas, Geothermy, Shale gas and Coal Bed Methane, construction, etc.

mud gas separator

Recent wellsite disasters have led to an increased emphasis on properly sized mud/gas separators. To assure safty, we should know mud/gas separator technology and recommends separator configuration, components, design considerations, and a sizing procedure. A simple method of evaluating mud/gas separation within the separator vessel has been developed as a basis for the sizing procedure.

The gas cut drilling fluid enter into the separator from the feed liquid month of the separator, after crashed with the strike plate, scattered in a series damper, increase the surface area, downward flow, cause turbulence state, make the gas separate with the drilling fluid. The free gas is ridded of by the top of the tank, the length of pipeline is decided by the field and allocated, and leaded to the safe place, the drilling fluid after degassing through the shale shaker and flow into the circulation tank.