Tag Archives: Mud Cleaners Supplier

With the combination of a desander and desilter mounted over a powerful multi-functional shale shaker, DC Solid control’s line of mud cleaners offer both high performance and versatility for the operator.
This integration of advanced equipment puts forth a unit that can handle large volumes of circulating fluids and is able to retain fluid integrity. Features such as our wedge-lock fastening system, mud bypass gate, and explosion proof enclosures all allow for ease of use. Our pride is truly expressed in our work through our craftsmanship, research, design, and the overall practicality of our equipment.

mud cleaner
With our in-house engineering and design capabilities, DC Solid control can integrate any number of hydrocyclone arrangements with any of our shakers. In all cases, DC Solid control’s hydrocyclones come with polyurethane bodies, where erosion resistant inserts are available. Standard hydrocyclone cone sizes available include 4”, 5”, 10”, and 12” and can be provided in arrangements of one to 20 cones.

mud cleaners
The first step in using a mud cleaner is to send the mud through a hydrocyclone, because it would be too thick for the cleaner to effectively work with. A hydrocyclone is a device that uses force to push purified mud through the top of the cyclone as thicker particles pass through the bottom section. Anything that goes through the bottom section then meets the mud cleaner.
You are welcome to call Dachuan Machinery to get more infos about the mud cleaner and we are appreciated to supply the cost-effective products and service for you.

Mud cleaners are the two-stage solids control equipment that are composed of several hydrocyclones mounted over a vibrating screen, known as a shale shaker. Mud cleaners are used to remove solids from drilling fluid and act as 2nd and 3rd phase solids control equipment.

Mud cleaners are used to remove drill cuttings from drilling fluid, known as mud. The mud is a non-Newtonian fluid of variable viscosity that serves several purposes in drilling operations. Mud is used to drive the down-hole motor, cool the drilling bit, carry the drill cutting to the surface for disposal, and maintain hydrostatic balance in the well.

SONY DSC

The mud cleaner is designed to remove the drill cuttings while allowing the weighted fillers of the mud, commonly barite, to stay suspended in the mud. The cuttings, consisting of solids greater than 74 to 105 micrometers, are filtered out in the staged process of the mud cleaner.

SONY DSC

The first-pass solids control devices of the mud cleaner are the hydrocyclones which are mounted over the vibrating screen of the shale shaker. Several hydrocyclones are used to increase the flow rate of the mud. There is also a combination of varying sized hydrocyclones. Smaller cones, typically 4″ in diameter known as desilters, remove finer silt sized solids, while the larger cones typically 10″ in diameter known as desanders removed the coarser sand sized particles.

The vibrating screen of the shaker is sized for the specific drilling operation. Lighter mud with lower solids content would use a finer screen while drilling fluid with higher solids content, known as weighted mud, would use a slightly coarser screen in order to ensure that the weighted fillers are not filtered out of the mud.

DC Solid control finished the production of 6 sets mud cleaners for a repeat customer from Russian. The mud cleaners are used for ZJ40 drill rig in drilling site.

DCQJ mud cleaner is a normal model of our company,we can design customized cost-effective mud Cleaner for customers special needs.Our mud cleaner can meet almost all needs for oil & gas well drilling fluids treatment system and HDD Mud Recycling System.

cleaners

When mud goes into a drilling system, such as one used for oil drilling, it first passes through a hydrocyclone, which is the first step in purifying the mud. After solids pass through this system, they next meet the mud cleaner, which is a mesh that has tiny holes to keep larger solids from passing through to the fluid. The mesh itself typically is made to block barite, because this is a common substance used and found in drilling. This keeps the mud from becoming too thick and stopping the drill, and it allows the larger particles to be used for other purposes.

mud cleaner

The mud cleaner system is comprised of a 12 cone hydrocylone de-silter and a 2 cone in-line de-sander which can be mounted on a DCS700-3 shaker or an adjustable stand. Feed volumes for the de-sander and the de-silter are up to 500 gallons per minute and 50 gallons per minute, respectively.

Learn more about our additional product offerings: centrifuges, shakers, screens, Loadscan, and service items. Contact us freely.