Tag Archives: Hydrocyclone Supplier

DC Solid control is a professional manufacture of drilling mud cleaning equipment for overseas market. DC Solid control equipment have taken lots of drilling site in Middle East, Africa, Russia, America, Brazil, Australia etc.

The main product of DC Solids Control equipment including: shale shaker, shaker screen, mud cleaner, desander, desilter, decanter centrifuge, mud agitator, mud gun, centrifugal pump, screw pump, vertical cuttings dryer, screw conveyor, High G drying shaker etc.

At present, DC solid control has 2 sets mud cleaner and matching hydrocyclone prepared to shiped to overseas market.

The mud cleaner we offer to them, with below technical specifications:

Model: DCQJ250X1/100X8
Treating Capacity: 120m3/h (528GPM).
Hydrocyclone specification: 10″x1/4″x8.
Matching Shaker: DCS630-3 linear motion shale shakers.

SONY DSC

The manufacture progress is as per international Standard. After all assembly finish, test with bentonite fluid. All connections and welding points no leakage, and shale shaker works well.

SONY DSC

Except for mud cleaner, we export large quantity of matching hydrocyclone for the same users. You are welcome to call Dachuan Machinery to get more infos about the mud cleaner and we are appreciated to supply the cost-effective products and service for you.

The high efficiency liquid hydrocyclone provides maximum oil/water separation efficiency, and the solid/liquid hydrocyclone is a cyclone clarifier that offers continuous solids removal from liquid. Both can be used in industrial process water, industrial reuse, oil/water separation, and clarification/separation applications.

Operation:

Based on the centrifugal principle, the particles are spun agaainst the outside wall of the hydrocyclone and gravitate towards the bottom into the sedimentation tank. The velocity at which the water flows through the hydrocyclone determines the efficiency at which the particles are separated from the water.

hydrocyclone

Features and Benefits:

Compact design with no moving parts.
Operation at turndown ratios from 5:1 to 15:1.
A stable oil core that allows for higher removal, reducing or eliminating the need for emulsion breaking chemicals.
Liners that feature twin inlet ports for superior hydraulic stability.
Materials of construction that provide superior erosion and corrosion resistance for longer design life.

hydrocyclone1

How to install it:

1. Install and connect the hydrocyclone vertically with the sedimentation tank underneath the hydrocyclone.
2. Special attention must be given to the correct flow direction: horizontal inlet and top vertical outlet are clearly marked by arrows.
3. Install the manual ball valve to the flush port of the sedimentation tank.
4. Check that the actual flow rate through the hydrocyclone is within the recommended range. Inadequate flow rate will result in reduced performance.
5. If more than one hydrocyclone is installed, leave sufficient space between units to facilitate maintenance.
6. Specially designed manifolds are available for mounting multiple filters.
7. A pressure relief valve must be installed upstream of the hydrocyclone if the pressure is not controlled effectively.

DC Machinery is a professional manufacture of hydrocyclone, we can design it according to clients requirements, so if you have need plese feel free to contact us.