Tag Archives: Drilling Mud Agitators

Drilling fluid mud agitator is a kind of drilling fluid tank solid control system equipment, drilling fluid mud agitator is mainly used for drilling fluid mixing,preventing drilling fluid solid phase particles subside in circulation tank, drilling fluid mud agitator make the performance of drilling fluid is steady, the mixing is uniformity.

agitator

Drilling fluid mud agitator is mainly made of explosion proof electric machine, reducer, engine base and impellers, the motor connect with the reducer, the reducer is connected with wave wheel by rigid coupling. The wave wheel is made of four impellers. Drilling fluid mud agitator wave wheel make the agitator produce vortex motion, in order improve the effect of mixing. Drilling fluid agitator is clamped middle of the impellers, it prevent the mud solid phase sediment around of the bottom impellers after stopping the machine, it can reduce the moment of resistance starting machine and avoid burnout the machine.

mud agitator

The motor of drilling fluid mud agitator use the horizontal type of installation, the reducer use the single stage arc cylindrical turbine worm reducer, it has the big efficiency. The drilling fluid mud agitator shaft seal use the special origination, solving the question of the shaft seal unreliable.

Drilling fluid mud agitator has the characteristics of the center of gravity is low, the stability is good, the effect of damping is good, the overall dimension is small, operation is smooth. The direct connection type don’t have the coupling intermediate link, the structure is simple, the performance is reasonable.

Mud Agitator is also called Mud Tank Agitator and widely used in the mud solids control system. It is installated in slurry storage tanks or mud tank and to prevent drilling fluid solid Particles deposited in the mud tank.

A mechanical agitator is driven by an explosion-proof motor coupled to a gearbox that drives the impeller & shaft. The impellers transform mechanical power into fluid circulation or agitation. The objective is to achieve a uniform suspension of all solids.

mud agitators

Solids control mud agitators are the mud mixers on Mud Tank. Including the horizontal and vertical type. That is meant by motor mounting direction. Nowadays, more and more users prefer the helical bevel geared agitator. Why? The helical bevel gear box will be more stable and reliable than the helical worm and wheel gearbox.

Mud agitator (1)

DC Solid control manufacture mud agitator with worm and wheel gearbox, also the agitator with helical bevel gear box. The high performance, efficiency, and quality is appreciated much among clients. Helical bevel geared agitator will transfer more efficient to shaft save more energy than common worm and wheel gearbox. No matter for horizontal or vertical agitator, there is helical bevel gearbox available.

Please contact us today to learn more about our mud agitators. For quote request please provide the following information: Tank Dimensions; Mud Weight Range; Horsepower; Impeller Size and Shaft Length.

 

Mud agitator is used in the surface mud tank to suspend solids and maintain a homogeneous mixture throughout the mud solids control system. A mechanical agitator is driven by an explosion-proof motor coupled to a gearbox that drives the impeller & shaft. The impellers transform mechanical power into fluid circulation or agitation. The objective is to achieve a uniform suspension of all solids.

mud agaitator

DCJBQ series mud Agitator, Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works realiablely and has great merit.

mud agitators

Common model of mud agitator  is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW. The drilling mud agitator is an important components for DC Solids Control drilling fluids processing system.

DC Solids Control as a professional manufacturer for solids control equipment, we have designed lots of high-quality products, and JBQ series Agitator is one of them. To keep both the mud uniformity and the suspension of solids, the mud agitator is used to agitate the mud consecutively and reliably.This agitator agitates the mud to make cuttings, silt and sand pass the solids control system without being precipitated onto the tank bottom.

Please contact us to get more information about all kinds model of mud agitators

Mud agitator is an important part of the drilling-fluid solids controlling system. DC solid control provide vertical and horizontal mud agitator. Horizontal agitator is the most popular type of mud tank system.

Mud Agitator is used in mud systems to suspend solids and maintain homogeneous mixture throughout the system. A mechanical agitator is driven by an explosion-proof motor,coupled to a gear box that drives the impeller shaft. The impellers (turbines) transform mechanical power into fluid circulation or agitation. The objective is to obtain a uniform suspension of all solids.\

mud agitator

Advantages of DC Drilling Mud agitator
The gearbox adopted worm and gear. Better scuffing more reliable.
Motor and gear box will be connected by coupling or directly. Agitation speed is more stable.
Good heat exchange performance faster cooling down.
Shaft and blades are customizable.
Durable enough, easy to install, operate ,and maintain.
Can be used under variety condition.

agitators

Please contact us with your tank dimension and your detail requirement. We will recommend the right model with specification about the horsepower, impeller (size, type& quality), and shaft length etc to meet your requirement.

Mud Agitators mix and agitate the drilling mud that is used to prevent solid particles from depositing in the circular tank. This is also used to stabilize the work of drilling fluid. The Impeller shaft present in the mechanical Agitator transforms mechanical power into fluid circulation. The Mud Agitator can be obtained from the Mud Agitator Manufacturer in China and are generally available in horsepower such as 5HP, 7.5HP, 10HP, 15HP, 20HP, 25HP and 30HP.

SONY DSC

Solid Control Mud Agitators act as mud mixers on mud tank. On a usual process these agitators should rotate at 60-70 rpm. Our high performance equipment is appreciated among clients all over India. If there is a large quantity of mud present in the site then large torque mud agitator will be required.

mud agitator

DC Solid control offer best range of Mud Agitator which works continuously at the drilling site by delivering optimum results. Our Principles has made us to supply our highly technological equipment to the power plants which are present in abroad.

Please contact us today to learn more about our mud agitators. For quote request please provide the following information: Tank Dimensions, Mud Weight, Range, Horsepower, Impeller Size. Shaft Length.

Drilling mud agitator is a device mounted on mud tank for agitating the drilling mud to prevent the drilled cuttings and fine solids from sedimentation. Nearly every large compartment of mud mixing and storage tank should be equipped with mud agitators to maintain the proper properties of drilling mud that will pump back to the borehole.

SONY DSC

Mud Agitator combines compact design with high torque performance levels necessary for a uniformly suspended flow of drilled solids throughout the mud systems.Powered by 1500RPM (4 pole) explosion proof motor and connected through heavy duty gear reducer, this agitator transfers high torque at RPM to Impeller to perform the most severe mud mixing conditions.

mud agitators

Impellers are available in three types viz. six blade mixed flow turbine type, four blade axial flow type and three blade twisted profile type to achieve highest performance in different site and mud conditions.

Gear reducers are worm type or helibevel type depending on the choice of the user. Standard models are available in 20 H.P. & 10 H.P. capacity.

Please contact DC Solid control company representative with your tank dimensions and maximum mud weights for the correct agitator model, horsepower, impeller (size, type and quantity), and shaft length to meet your requirements.

To keep both drilling mud uniform and solid particle suspension, mud agitator is used to agitate the mud consecutively and reliably. It is furnished with an up-to-date SEW gear reducer featured by high driving efficiency, compact structure, low noise level, reliable quality and easy maintenance. Therefore, it is a reliable product of agitating the mud.

Mud agitator keep drilling fluid uniformity and make solid phase particles suspension. It is used to drilling fluid agitate and mix, in order to prevent drilling fluid solid phase deposit in tank type circulating system, make drilling fluid performance is steady and mixing uniform.

mud agitators

Mud agitator uses cycloidal reducer under the 5.5kw, mud agitator is used in oil drilling fluid agitate, the structure is compact, the cover area is small, under 7.5kw drilling fluid mud agitator use turbine worm reduction drive, the transfer torque is big, operation is smooth, the work is reasonable. The common use model of mud agitator is JBQ5.5, JBQ7.5, JBQ11 and JBQ15.

Characteristics of mud agitator

1 Using arc and cylindrical worm reducer, shaft section is arc cylindrical worm, the turbine profile is worm.
2 Using reducer combine with explosion proof motor, the maintenance is convenient, it adapts to the bad working condition of field.
3 The agitating strength is big, sweep range is wide and decrease the starting resistance moment.
4 The motor is installed level, installation, adjustment and replace is convenient.

7.5 kW above mud agitator using turbine worm reduction drive, has the transmission torque, smooth operation, reliable work, etc advantages. DC is a professional manufacture solid control equipment in china. We will provide our client high quality products with most reasonable price, at the same time we also sincerely offer the high level after sales service for any home or abroad clients. We still adhere to the concept of creating the maximum values and the satisfaction for our clients.

Mud Agitator is used in surface mud systems to suspend solids and maintain homogeneous mixture throughout the system. A mechanical agitator is driven by an explosion- proof motor, coupled to a gear box that drives the impeller shaft. Below is the more feature of DC Solid control mud agitators.

67671

Structure features of drilling mud agitator

1. Helical-bevel gearbox.
2. Explosion-proof electric motor.
3. Mud agitator has vertical and horizontal type.
4. Power available ranging from 2.2 to 22KW. Motor placed in a horizontal position, installation, adjustment, easy to change.
5. Compact,quiet,smooth and easy to maintain.

67673

Design features of drilling fluid agitators 

1. Agitator features a rugged cast iron gearbox that houses helical bevel gearing. The gear sets are precisely ground to prevent all but the slightest amount of backlash in the gear sets. This feature promotes longer life by eliminating the high impact forces generated when the unit is energized at start-up.
2. Internal gears and bearings are lubricated with mineral oil. When the ambient temperature drops below 23ºF or rises above 140ºF, a synthetic lubricant should be substituted.
3. A unique feature of the Agitator is the lower bearing, which can be maintained from the top of the tank.
4. An external oil sight glass has been provided, so the oil level can be checked at a glance.
5. Vent plugs are supplied and installed in the gearbox housing to maintain a homeostatic internal pressure, which prevents a pressure build-up that could blow out an oil seal.

DC solid control also can provide the different length shaft and impeller of mud agitators, and accept the client’s customized requirements.