Tag Archives: Drilling Fluid Shale Shaker

High G drying shaker is mostly used to process drilling fluid or drilling cuttings. It can work more effectively with better separation result. Drying shale shaker is similar as common shale shaker. It can be used as first phase solids control equipment also the first stage of drilling waste management.

High G drying shaker

Features of High G drying shaker from DC Machinery

Hi-G Dry Shaker Features & Benefits:
Design :Adopt ANSYS Limited Element Analysis to optimize structure
Metal & Rubber composite material for damping spring with longer life
Vibrating Motor: Italy OLI Brand, IEC Ex and ATEX Option Available
Deck Material: Q345 High Strength alloy material

The drilling cuttings will be drying by the high G Force Dry Shaker, and fluids will be catched by the tank under the shaker, a centrifuge feed pump will take the fluids and feed to a high speed decanter centrifuge, after treatment by the high speed decanter centrifuge, the fluids can return back the active mud system for reuse.
Besides above the drilling cost can be reduced and the drilling waste volume can be cut down,for the purpose of reducing environmental pollution.The Hi-G drying shaker suitable for both of WBM and OBM.

DC Solid control sells new drilling equipment including Shale Shakers and Shale Shaker repair parts. Please see our online inventory and contact our sales department for information and quotes.

Shale shakers are devices that remove drill cuttings from the drilling fluid that is used for boring holes into the earth. Controlling the solids in drilling fluid is an important component of the cost of drilling, so research into improved shale shaker design is ongoing.

shale shaker

Shale shakers typically consist of large, flat sheets of wire mesh screens or sieves of various mesh sizes that shake or vibrate the drill cuttings, commonly shale, across and off of the screens as the drilling fluid (mud) flows through them and back into the drilling fluid system. This separates the solid drill cuttings from the fluid so that it can be recirculated back down the wellbore. In oilfield industry, linear motion shale shakers are widely used.

If you have requirements of shale shakers, please contact DC Solid control office.

The dryer shaker, or dryer, is a linear motion shaker used to minimize the volume of liquid associated with drilled cuttings discharged from the main rig shakers and hydrocyclones.

The dryer shaker deliquifies drilled cuttings initially separated by another piece of solids-separation equipment. These drilled solids can be the discharge from a main shaker or a bank of hydrocyclones. Dryers recover liquid discharged with solids in normal liquid/solids separation that
would have been previously discarded from the mud system.

SONY DSC

This liquid contains colloidal solids, and the effect on drilling-fluid properties must be considered, since dewatering systems are frequently needed to flocculate, coagulate, and remove these solids.

SONY DSC

The perfection of the linear motion shaker for drilling-fluid use, coupled with advanced fine-screen manufacturing technology, has made these dryers very efficient. In most configurations, the dryers use the same style of screens, motors, and/or motor/vibration combinations as do other linear motion shakers by the same manufacturer.

Linear motion shale shaker is the most used separation equipment in solid control system. It has a mesh screen whereby the return mud from the well and drill cuttings flow over when the shaker vibrates.

Now, DC Solid control produced 12 sets linear motion shale shaker to Dubai clients used in oil field. A shale shakers are not only used in the upstream sector of the oil and gas industry, but also in other industries, such as ore mining and cleaning, coal mining and cleaning, etc.

shale shaker

Main Features:
1.The vibration system adopts long rod type explosion-proof vibration motor,with the advantages of compact structure, easy installation,simple maintenance,smooth operation and long service life.
2.Strong vibration,high migration speed, high permeation and large treatment capacity.
3.Free operation screen box improves separation effect by extending the time of solids on the screen.
4.This type of shale shaker adopts high-performance rubber shock isolator and floating suspension support structure,realizing the ideal charateristic of non- linear,making the vibration more smooth and effectively lowered vibration noise.
5.All the fasteners of the equipment is made from precise processed stainless steel materials of high quality. The special parts adopts high strength materials and the spare parts of key positions have gotten surface coating treatment.

shale shakers

If you have any problems or questions about our products or need our support and assistance, please write to us, we will reply to you within 24 hours, and we will use security measures for your information and never reveal your information to the third party. If you become our customer, you will get corresponding discount.

Shale shakers are widely used for treatment of drilling fluid, or mud, during drilling operations. The mud is pumped into the borehole to carry larger particles away from the bore and out the top of the borehole. The mud exiting the wellbore carries with it larger sand and shale particles that must be removed before the fluid is circulated back to the borehole.

SONY DSC

The shale shakers use vibrating screens to separate these larger particles from the drilling fluid. The screens are constructed of stacked wire meshes, with the wire mesh that has the smallest openings on the top facing the mud. Particles collect on the screen as a filter cake. Vibration enhances the fluid flowrate through the screen and causes the cake to migrate along the screen surface to the exit.

SONY DSC

The shale shaker produced by DC Machinery has absorbed the advanced technology of design and manufacture, the structure has been optimized, therefore can clean the harmful solid phases in drilling mud effectively and guarantee the efficient recovery of drilling fluid. It is the most cost-effective product in domestic.

If you have any problems or questions about our products or need our support and assistance, please write to us, we will reply to you within 24 hours, and we will use security measures for your information and never reveal your information to the third party. If you become our customer, you will get corresponding discount.

Shale shaker is a most popular equipment uses in drilling mud primary solids control system. Recent days. DC Solid control shipped one set of duplex linear motion shale shaker shipped to France.

The duplex shale shaker complete assembly with 900GPM flow rate capacity for drilling oil and gas well, screen configuration. Triple deck for each shaker. 600V, 3 Phase 60Hz.

linear motion shale shaker

When we got client’s inquiry or demand we’ll firstly analysis actual condition. Then propose technique or process steps. According to raw material, working condition the optimal design or configuration will be set soon.

DC solid control is able to produce both material shaker, just need your detail requirements. Please come to us for further question.

 

Shale shakers are important components integral to the drilling process and represent the first phase of solids control in drilling industries such as coal cleaning, mining, and oil and gas production.

Shale shakers consist of vibrating sieves or screens which use force to advance the filtered mud through to the mud tank. During operation the inclination of the screen varies proportional to the flow rate of mud.

SONY DSC

Shale shakers are intensive vibrating devices. At the first stage of mud separation, they utilize a motor to generate vibrations. Acting as a sieve, the vibrating action pushes the drilling mud through a wire cloth screen. Drilling mud that filters through the shaker screen is moved into a mud tank for additional processing if necessary. Larger solids pass over the screen surface and are discharged for later collection and disposal.

DC Solid control manufacture many types shale shakers for clients choose. If you want to choose lower price and high quality shale shaker, please contact DC Solid control at once.

A shale shaker is a vibrating screen or sieve that strains cuttings out of the mud before the mud is pumped back down into the borehole. Cuttings are processed through a series of shale shakers with sequentially finer mesh sizes, designed to remove progressively smaller drill cuttings.

To be as a cost-effective shale shaker manufacturer. DC Solid control has many types of environmental shale shakers for your choose. Below is the features of our shale shakers.

shale shaker

Easy screen inspection, removal, and installation
Low sound production (74 +/- 4 dBA)
Optional vapor extraction covers protect operating personnel and surrounding equipment from vapors emitted during the screening process (dependent on customer provided
HVAC exhaust system)
Optional self-locking splash covers provide clean operating environment
Light-weight screen panels make for easy installation
DC shale shaker designed according advanced technology in the drilling industry. AIPU supply various options of shale shaker to meet unique client’s demand, single linear motion shaker, double deck shaker and dual motion shale shaker available for orders.

High G drying shaker is designed for drilling cutting’s drying. It can dry the drilling cutting to well delivery condition and does not add any chemicals. The drilling cuttings from solids control shale shaker, then transfered to dry shaker by auger conveyor. The dried cutting was transported away and the water was transfered to decanter centrifuge to second treatment.

high G drying shaker

Basic technical specification
v Vibratory Motion Type Linear Motion, Adjustable G force ≤8.0G
v Capacity up to 150m3/h (660GPM)
v Screen Deck angle range -1°~+5° adjustable by electrical or manual, Vibration Amplitude 4.4~6.34mm
v Screen area 585x1165mm 2.73m2 Composite frame or metal frame for optional 4 pcs
v Motor specifications 1.94Kw 2 pcs, ExdIIBt4 / IEC EX/ ATEX
v Feeding type Hopper feeder

DC Solid control is a professional oilfield drilling mud Hi-G Dryer shaker supplier and manufacturer in China oil drilling mud solids control and drilling waste management industry.

Drilling fluid shale shaker is the primary processing equipment in solids control system, used for separating larger cuttings from drilling mud, and it plays an important role in protecting drilling fluid performance.

SONY DSC

The best-selling model shale shaker of our company is 3 panel steel frame shaker screen linear motion shale shaker.

Wedge-Lock Screen System
Dual overload Starter – High “G” Force
Cylindrical Cone Manifold
Adaptable to fit all Mud Systems
Large variety of screen mesh sizes

The shale shakers produced by DC Machinery have the advantages of large handling capacity, screening high precision, low-energy, environmental protection and so on.  DC Machinery supplies high quality shale shakers, including Linear Motion Shale Shaker, Balanced Elliptical Motion Shale Shaker, etc.