Tag Archives: Drilling Cutting Box

Congratulations, DC Solid control got the order of 300pcs drill cutting box from a foreign clients used for offshore. We got the inquiry from a exhibition in USA. We only need 1 weeks to Negotiate the manufacturing design.

Now the drill cutting box are under the production, we promise to ship it within 50 days. The drill cutting box are used for transportation and safe handling of hydrocarbon contaminated drill cuttings to and from offshore platforms. These units provide a safe and efficient means of containment of drilling waste for transport to treatment and disposal sites.

mud cutting box

Features of the cutting box from DC Solid control

1. Provide safe and efficient containment of drilling waste for transportation from drilling rigs / production platforms to onshore treatment or disposal sites2. All units designed, manufactured and fully certified to DNV 2.7-1 / EN 12079 standards
3. Sealed lid prevents any spillages during transportation
4. Forklift pockets for easy maneuvering

We can also develop a new DNV 2.7-1 standard design to you in relation to your Project special requirement, approved as per DNV 2.7-1 / DNV 2.7-2, IMDG code in Max. 25 Days. We are proud to be associated with the best of oil & gas drilling & service companies for their DNV approved offshore container requirements.

Mud Skip/Cutting Box with patented sliding door is used for transportation and safe handling of hydrocarbon contaminated drill cuttings from offshore platforms.

The cutting box looks like a traditional roll off, but has no door and usually includes internal gussets on all four sides to keep debris from getting caught in the corners.

SONY DSC

Drilling cutting box produced by Dachuan have the following characteristics:
1. Structure of cutting box is indurative and with watertight seal.
2. The bottom of cutting box is planar and no bulge.
3. Weld surface molding is uniformity, densification, closely integrated with the steel plate, seamless, and no oversize surplus height of seam, weld beading, arc crater, undercut and other defects.
4. Antiseptic sand blasting of Q235A steel, twice of expoxy zinc rich primer, penguard midcoat MIO and chlorinated rubber top-coat. the thickness of dry editpaint film is larger than 100um
5. CCS Certificate of offshore drilling cutting box.

SONY DSC

The Mixing or Cutting container is used to mix the liquid by-product of drilling (“cuttings & mud”) and other medium until it is solid and ready for landfill disposal.

 

In the United States, cuttings boxes (small tanks) must be Coast Guard approved. In other developed areas there are similar requirements. These standards have been developed for safety reasons. Some of the drilling cutting box requirements are:

box

1. Cutting boxes should have a cover that can be locked down and sealed shut. Lid gaskets should be checked frequently.
2. The Cutting boxes must be of sufficient strength to survive a drop of 1 meter without leaking or deforming. Skids, frames, and braces should be in good shape. If the Cutting boxes is rusty or shows signs of abuse, it is probably not maintained properly.
3. Since the Cutting boxes is sealed, it must have pressure relief to prevent
explosion and vacuum relief to allow the lid to be opened when the contents cool and form a vacuum. A rupture disc is usually installed on the lid to allow emergency venting. Check the rupture disc inspection date. A small valve may be used for vacuum venting.

SONY DSC

In developing countries, homemade boxes are sometimes encountered. Transporting and emptying boxes is always dangerous. The use of homemade boxes or poorly maintained boxes can be hazardous.