Tag Archives: China Mud Gas Separators

29Apr 2022

Specific Mud gas separator shipped to Indonesia

⋅ Leave a Comment

Drilling fluid mud gas separator is a special equipment of gas cut drilling fluid primary degassing, it is mainly used to eliminate the bubbles which the diameter is about 3-25mm.

The big bubbles is aiming at the expansion gas which is fully the borehole, if it is not eliminated, it will causes the well kick even spurt the surface of drill plate. The equipment uses the prevent sulfur material and adapts the gas with H2s processing.

SONY DSC

Installation and maintenance

Install

It is installed ground side of the circulation tank, use steel wire ropes fixed gas liquid separator with the ground.

Maintain

1Before using, we should check the bottom buffer baffle, if attrition more than 10mm, it must be replaced the two baffles at the same time.
2After using we should keep the separator empty and open the washing month and clean it.

DC Solid control is a professional manufacturer of solid control equipment. We can supply all kinds of mud gas separator such as DCZYQ800, DCZYQ1000, DCZYQ1200.

23Nov 2021

China high quality DCZCQ Mud gas separator

⋅ Leave a Comment

Poorboy degasser also called mud gas separator that is an ideal for use where drilling is likely to encounter large volumes of gas. The technology is especially beneficial in sour gas environments or when drilling with an under balanced mud column.

To be as an professional producer of drilling fluid circulation equipment, DC Solid control has many different models of mud gas separator for sale, such as ZCQ800,ZCQ1000, and ZCQ1200. Different types with different treating capacity that according to your actual use to proposal.

Mud gas separator

Eachmud gas separator has limitation on much it can safely handle volume of gas. If the volume of gas exceeds the maximum limit, gas can blow through into the rig. It is very important that you must estimate gas flow rate on surface based on pit gain and kill rate in order to see how much expected gas on surface. This will be the limitation on how much you can circulate for well killing operation. You can estimate the volume gas on surface by using well control kill sheet provided by several companies. You need to ensure that the vent line should be as straight as possible with a larger ID in order to minimize back pressure while venting the gas out.

SONY DSC

Anything that you don’t understand, please contact us to learn more about how to calculate the gas volume of your drill rig. And welcome to your valued inquiry of mud gas separators.

01Sep 2020

Professional manufacturer of DCZCQ Poorboy degasser

⋅ Leave a Comment

Poorboy degasser also called mud gas separator that is an ideal for use where drilling is likely to encounter large volumes of gas. The technology is especially beneficial in sour gas environments or when drilling with an underbalanced mud column.

To be as an professonal producer of drilling fluid circulation equipment, DC Solid control has many differnt models of mud gas separator for sale, such as ZCQ800, ZCQ1000, and ZCQ1200. Differnt types with differnt treating capacity that according to your actual use to proposal.

SONY DSC

Each mud gas separator has limitation on much it can safely handle volume of gas. If the volume of gas exceeds the maximum limit, gas can blow through into the rig. It is very important that you must estimate gas flow rate on surface based on pit gain and kill rate in order to see how much expected gas on surface. This will be the limitation on how much you can circulate for well killing operation. You can estimate the volume gas on surface by using well control kill sheet provided by several companies. You need to ensure that the vent line should be as straight as possible with a larger ID in order to minimize back pressure while venting the gas out.

SONY DSC

Anything that you don’t understand, please contact us to learn more about how to calculate the gas volume of your drill rig. And welcome to your valued inquiry of mud gas separators.

 

21Oct 2019

ZYQ series Mud gas separator(Poor Boy Degasser) for sale

⋅ Leave a Comment

ZYQ series Mud gas separator(Poor Boy Degasser) is professional equipment to treat the gas invade mud The MUD GAS SEPARATOR unit, with models engineered for use onshore and offshore, is used to reliably separate and reliably vent large pockets of free gas from the drilling fluid system.

It is also ideal for use when an operator is drilling with an underbalanced mud column. The compact separator is well-suited for the space limitations of offshore drilling. It is skid-mounted and trailer transportable, which simplifies transport, spotting, and installation.

Mud gas separator

Features of the mud gas separators;
High efficiency and easy to maintain
Large capacity
Easy transportation and installation.
Maximizes free gas/mud separation
Unique U-shaped tube design eliminates moving parts and ensures a positive fluid seal, maintaining safe mud levels
Efficient baffle arrangement to easily separate gas from fluid
Available in varying sizes and lengths, accommodating any volume of fluid with high concentrations of gas
Heavy-duty steel construction and adjustable mounting skid for any rig

Mud gas Separators is an extremely reliable, vital piece of safety equipment for today’s drilling operations. It is ideal for use where drilling is likely to encounter large volumes of gas, sour gas or when an operator is drilling with an under balanced mud column. This Mud gas Separators is primarily used to separate and safely vent large pockets of free gas, that may include toxic gases such as hydrogen sulfide, etc. from the drilling fluids processing system. We can design and fabricate the poor boy in varying sizes and lengths to meet your specific drilling conditions