Tag Archives: Best Quality Shale Shaker

To be as a professional manufacturer of solid control manufacturer. DC Solid control can supply all kinds equipment for Oil and gas drilling site. We got the good feedback from our user this morning which is the 3 sets of Mud system to Oman drilling site last year.

shale shaker

Shale shaker is vital to the solids control system and is considered the “first line of defense”. Shale shakers act by removing solids from drilling fluid as the mud passes over the surface of a vibrating screen. Particles smaller than the openings in the screen pass through the holes of the screen along with the liquid phase of the mud. Particles too large to pass through the screen are thereby separated from the mud for disposal. Without proper screening of the drilling fluid during this initial removal step, downstream equipment will experience reduced efficiency and effectiveness. The downstream hydrocyclones and/or centrifuges (if elected) will simply be overloaded beyond their design capacity.

shale shakers

Features& Benefit of DC shale shakers:
Adjustable High G force for primary solids control or cuttings drying.
Heat treatment on complete shale shaker deck.
Vibrating Motor: IEC Ex, ATEX and UL Certified
Electrical components: SIEMENS, Schneider Brand
Shale Shaker Bottom Deck Material:Stainless Steel
Wedge type design for easy and quick screen replacement
Electric Shaker Deck angle adjustable while working

Our factory and company are Quality Management System ISO 9001-2000 certified. DC Solids Control operate international oil gas drilling mud separation system sales,service,manufacturing,distribution service. Buy Linear motion shale shaker from China manufacturer. Your best shale shaker deal starts here.

Shale shakers remove large solids (typically larger than 75 microns) from drilling fluid. (Drilling fluid is also known as drilling mud due to its turbid appearance.) Drilling fluids lubricate and cool the drill bit and are therefore integral to any drilling process. Because fluids are expensive to produce, shale shakers improve a rig’s economy by stripping away cuttings for disposal before recycling the fluid.

drilling fluid

Shale shakers are intensive vibrating devices. At the first stage of mud separation, they utilize a motor to generate vibrations. Acting as a sieve, the vibrating action pushes the drilling mud through a wire cloth screen. Drilling mud that filters through the shaker screen is moved into a mud tank for additional processing if necessary. Larger solids pass over the screen surface and are discharged for later collection and disposal.

shale shaker

Linear motion shale shakers represent the newest shaker technology and are the most common approach to solids control in the oil and gas drilling industries. They produce linear motion via a pair of eccentric shafts rotating in opposite directions. Linear motion provides superior cuttings conveyance and is able to operate at an uphill slope to provide improved liquid retention.

Shale shakers consist of vibrating sieves or screens which use force to advance the filtered mud through to the mud tank. During operation the inclination of the screen varies proportional to the flow rate of mud.


Shale shaker is the most important part in drilling fluids processing system,also plays a decisive role in drilling mud system.Shale shaker decides the performance of the whole solids control system.


DC Machinery provides both linear motion shale shaker and balanced elliptical shale shaker. DCS series shale shaker can meet varied needs of the different customers.

drilling mud shaker

Shale shakers typically consist of large, flat sheets of wire mesh screens or sieves of various mesh sizes that shake or vibrate the drill cuttings, commonly shale, across and off of the screens as the drilling fluid (mud) flows through them and back into the drilling fluid system.

This separates the solid drill cuttings from the fluid so that it can be recirculated back down the wellbore. In oilfield industry, linear motion shale shakers are widely used.

DCS series Shale Shakers are modular designed. Featured with high vibration strength, large screen size, adjustable shaker angle. Suitable for onshore or offshore drilling operations.


The DCS series shale shakers were developed to provide the market with more reliable technology and more hoisting performance. Featured with special modular design, long working life and high performance, it could match all kinds of mud clean or solid control system. Twin-shaker and triple shaker could be provided according to customer’s requirement.


DC solid control can provide you the all models and type shale shakes, such as linear motion shale shaker DCS700-3, DCS630-3 and DCS830-3. Dual motion shale shaker includes, DCSZ585-4K, DCSPT750-3K and DCSPTS650-4K.

You can contact us if you have interest with our shale shakers. Our engineer can design and maufacture the shale shakers according to your request. Looking forward your earlier responses.

DCS585-4 shale shaker is a very hot model in solid control system, the main features of this shaker is the vibration locus. We use 2 motors to realize the linear motion and balanced elliptical motion.

shale shaker

The reason why this model shale shaker is hot sales at this moment is its treating capacity and operation methods is same with Mongoose series shale shakers. Besides the price is much lower than Mongoose shale shaker.

shale shakers

We can choose famous Brand Martin or Drennan vibration motor to this shale shaker that make the shale shaker  more better and long service life. We also tested this shaker in our factory and send the video to the user, the users were very satisfication with its working efficiency.

If you also have request with Mongoose shaker, please contact us, you will getting the best product and lower price shale shaker from DC Solid control.

High G drying shaker is mostly used to process drilling fluid or drilling cuttings. It can work more effectively with better separation result. Drying shale shaker is similar as common shale shaker. It can be used as first phase solids control equipment also the first stage of drilling waste management.

High G drying shaker

Features of High G drying shaker from DC Machinery

Hi-G Dry Shaker Features & Benefits:
Design :Adopt ANSYS Limited Element Analysis to optimize structure
Metal & Rubber composite material for damping spring with longer life
Vibrating Motor: Italy OLI Brand, IEC Ex and ATEX Option Available
Deck Material: Q345 High Strength alloy material

The drilling cuttings will be drying by the high G Force Dry Shaker, and fluids will be catched by the tank under the shaker, a centrifuge feed pump will take the fluids and feed to a high speed decanter centrifuge, after treatment by the high speed decanter centrifuge, the fluids can return back the active mud system for reuse.
Besides above the drilling cost can be reduced and the drilling waste volume can be cut down,for the purpose of reducing environmental pollution.The Hi-G drying shaker suitable for both of WBM and OBM.

Shale shakers are widely used for treatment of drilling fluid, or mud, during drilling operations. The mud is pumped into the borehole to carry larger particles away from the bore and out the top of the borehole. The mud exiting the wellbore carries with it larger sand and shale particles that must be removed before the fluid is circulated back to the borehole.


The shale shakers use vibrating screens to separate these larger particles from the drilling fluid. The screens are constructed of stacked wire meshes, with the wire mesh that has the smallest openings on the top facing the mud. Particles collect on the screen as a filter cake. Vibration enhances the fluid flowrate through the screen and causes the cake to migrate along the screen surface to the exit.


The shale shaker produced by DC Machinery has absorbed the advanced technology of design and manufacture, the structure has been optimized, therefore can clean the harmful solid phases in drilling mud effectively and guarantee the efficient recovery of drilling fluid. It is the most cost-effective product in domestic.

If you have any problems or questions about our products or need our support and assistance, please write to us, we will reply to you within 24 hours, and we will use security measures for your information and never reveal your information to the third party. If you become our customer, you will get corresponding discount.

High G drying shaker is designed for drilling cutting’s drying. It can dry the drilling cutting to well delivery condition and does not add any chemicals. The drilling cuttings from solids control shale shaker, then transfered to dry shaker by auger conveyor. The dried cutting was transported away and the water was transfered to decanter centrifuge to second treatment.

high G drying shaker

Basic technical specification
v Vibratory Motion Type Linear Motion, Adjustable G force ≤8.0G
v Capacity up to 150m3/h (660GPM)
v Screen Deck angle range -1°~+5° adjustable by electrical or manual, Vibration Amplitude 4.4~6.34mm
v Screen area 585x1165mm 2.73m2 Composite frame or metal frame for optional 4 pcs
v Motor specifications 1.94Kw 2 pcs, ExdIIBt4 / IEC EX/ ATEX
v Feeding type Hopper feeder

DC Solid control is a professional oilfield drilling mud Hi-G Dryer shaker supplier and manufacturer in China oil drilling mud solids control and drilling waste management industry.

Dual motion shale shaker is an advanced model shale shaker in solid control system, it has two movements locus, one is linear motion and the other is elliptical balanced motion. This month, DC Solid control shipped 4 sets dual motion shale shaker to a domestic users.

dual motion shale shakers

DC dual motion shale shaker installed 3 motors to reach both motion application. The mud flow capacity of the dual motion shale shaker can reaches to 150 cubic meters per hour for first phase cleaning before desander. The same size linear motion shaker normally reaches 120 cubic meters per hour maximum.

shale shaker

2 big motor work for linear motion, 1 big motor and 1 small motor work together for elliptical motion. The control panel will fit wire connection to control which motor working.

Now many shale shakers, desanders, desilters and mud cleaners are storaged in DC warehouse. Most of the spare parts or wear parts are also storaged here. DC experienced service engineers can also be sent out for commissioning and after sales service.

Shale shaker is a most popular equipment uses in drilling mud primary solids control system. According to different processing result and mud condition, the operator may choose the shale shakers with different vibration motions. The newly designed by DC shaker can change the vibration mode from liner motion to dual motion shale shakers.

DC Solid controls’s dual motion shale shaker has 3 units vibrators, comparing with other brand dual motion shaker DC Solid control’s shaker is more cost competitive. The changing of the vibration is realized by operation on the control panel, no need to adjust the eccentric block of the vibration motors.

shale shaker

DC Solid control’s dual moion shale shaker has two models, one is DCPTS750-3K, this types vibration motors are 1.72kwx2+0.4kw, with 3 panels screen, has larger screen area than another type. The other model is DCPTS650-4, with 1.74kwx2+0.45kw vibration motors, and 4 panels screen.

Dual motion shale shaker has a good adaptability and outstanding advantages to fragile and clay stratum, it has the characteristics of treating capacity 20% larger than linear motion shale shaker, high drilling cuttings discharge speed,long service life of screens and small splash of drilling fluid. If you want to learn more about it, please feel free to contact me.