Tag Archives: Best Quality Shaker Screens

Hookstrip bonding shaker screen is a kind of screen which is designed by our country proper development, it is made of two layers or three layers of stainless steel ne cloth to glue, it without metal plate, the screen cloth according high temperature bonding technology to strong unifies in together. This kind of multilayer structure design increases the strength of shaker screen and using life time. But each screen meshes are different, accurate and reasonable collocation make screening effect is more detailed, it not only can guarantee the enough strength but also increase the effective area in screening process,

shaker screens

Hookstrip soft bonding shaker screen use a coarse mesh screen and a detail mesh screen to bond together. When use it, we should install a network, then the bonding laminated screen is tension Field tests show that, the using life of this kind of screen can extend. Special to point out, the two sides of super fine screen is not pressed in crochet, so in tension process, the more fine screen layer bears pressure is very small, it is only used as screening layer. This new kind of pressure layer is separate with screening layer is proved is reasonable and the effect is remarkable.

screens

The crudeness or fineness of bonding grid size and bearing layer screen is according need to choose. The upper screen is more fine, the stress layer screen is more fine, the size of grid smaller. Usually the screening layer use 60-100mesh, the stress layer use 30 mesh, when screening layer is bigger than 150 mesh, the stress layer use 40mesh. When screening layer is bigger than 150mesh, the press layer use 60 mesh, in general the grid size is 33mm*25mm*25mm.

DC manufactures all series shale shaker which is an optimal material for petroleum drilling machinery of oil field project. We mainly supply five different shale shaker screens, mainly including hook strip screen, frame shale shaker screen. Hook types and steel frame is the most saleale type in our factory.

shaker screen

Steel Frame Shaker Screen is in common used presently, that are constructed mostly withe two or three stainless steel layers bonded tightly to the steel frame.The frame is made up of the high-strength square steel tube or flat steel welded to multi- ribbed construction.These layers are coupled with the frame through metal backing plate or bonded straightly as well.We possess the strong experience and the ripe technology,and will provide various specifications of steel frame screens to serve the clients’ demands.

Material: stainless steel wire, low carbon galvanized.
Weaving and characteristics: crimp before welding.
Uses: used in coal, mine, water profession.

If you have any request of different type shaker screen, welcome to contact DC Machinery.