Mud agitator is the special agitating equipment in oil drilling mud circulating tank. Mud agitator keep drilling fluid uniformity and make the solid phase particles suspension.

Function of Mud agitator 

It is mainly used in drilling fluid mixing to prevent drilling fluid solid phase particles precipitate in tank type circulating system, also make circulating drilling fluid performance is stable, mixing is uniformity, it is the one equipment of the science drilling. Mud agitator should set in the place of centre of working volume level, the distance of impeller and tank bottom is the 1/3 to 1/4.

Superiority of DC Solid control

DC Solid control is the special mud agitator company, our company product design reasonable, structure is unique, use worm and worm wheel gearing-down device, has the advantages of transmit torsion is big, well stability and safety, service life is long, convenient to maintain and with the large agitating and discharging.

Common Mud agitator

Below 5.5kw mud agitator use cycloid reducer, mud agitator adopt to oil drilling agitating, structure is compact, small area. Above 7.5kw drilling fluid mud agitator use turbine worm screw type decelerate drive, and has the advantages of drive torsion is big, operation is stable and work reliable.

Advantages of DC Agitator:

Curve bevel gear drive, drive efficiency bigger than 97%-99.5%, energy loss is lower.

Curve bevel gear the total overlap ratio is big, big gear curvature radius and the carrying capacity is strong.

Te driving of drive sprocket and engaged wheel adopt the novel axis polarization design make agitator work more stable, the noise more lower.

HT200 cast iron outer skin strength is high, the surface is hammer paint.

We can accord to customer requirements to deploy double-deck impellers.

Reducer combine with explosion-proof motor, convenient to maintain, apply to field bad condition use.

Stirring intensity is big, wide spread range and decrease the starting resistance.

The shaft sealing use the special organization solves the problems of shaft sealing unreliable.

The direct connection eliminates the intermediate link of coupling, structure is simple and performance is reasonable.


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Post Navigation