Category Archives: Mud Gun

04Sep 2019

DC mud mixing guns at discount sales

⋅ Leave a Comment

DC mud mixing guns are simple in design. All turning takes place on double rows of steel balls in flame hardened races. There is nothing to tighten or adjust. Flow is unrestricted and pressure drop is minimum. DC mud mixing guns are of 3 types:

Spinner/Pivot Type

The Spinner/Pivot Type mud gun is designed for use in tanks where the utmost in constant agitation is desired. The nozzles are set at an angle and the pressure in the line imparts a spinning motion which is accommodated by style 20 high pressure Swivel Joints. Furnished in any desired length as specified in order.

Size : 2″, 3″, 4″ Pressure : Up to 5,000 PSI

mud guns

Non Spin Type

The Non Spin Type mud gun is designed for mixing large volumes of mud in the top of the tank or pit and also for transferring mud from one tank to another tank.A Non Spin mud gun cannot spin because centrifugal force is neutralized by the offset of the barrel of the gun. Perforated flanges and locking pins pemit locking of gun in any position.

Size : 2″, 3″, 4″ Pressure : Up to 5,000 PSI

mud gun

Bottom Type

The Bottom Type mud gun is designed for use where large size metal tanks are employed as mud pits. It is simple in construction, easy to install and easy to operate.

Size : 2″, 3″, 4″ Pressure : Up to 5,000 PSI

If you have requirements with mud guns, please feel free to contact me freely.

 

30Aug 2019

How to choose the mud agitators and mud guns

⋅ Leave a Comment

An important equipment used in solids control is mud guns and mud agitators. Both pieces of equipment are used inside the mud tank. The mud agitator is mounted on top of the tank and stirs the mud much like a blender. The typical gear ratio is 30:1. A 1,800-rpm motor geared to 30:1 will output 60 rpm. The size of the motor and impeller diameter is determined by the capacity of the mud tank.

Mud guns

The shaft length is determined by the depth of the mud tank. The number needed is based on the mud tank’s capacity. Mud guns are also mounted at the top of the mud tank and have a handle and swivel so the guns’ flow can be adjusted.

They are used to stir the bottom of the tank. They have nozzles at the end of the guns that move the mud at an accelerated rate at the bottom of the mud tank. The size of the bore in the nozzle determines the flow rate for each mud gun. The required flow rate will determine the number needed in application.

Mud agitator

Mud agitators and mud guns are important because they keep the mud moving in the mud tank so that the mud does not separate or fisheye, which would affect the flow characteristics and mud weight consistency.

To be as a professional manufacturer of solid control system, DC Machinery can produce all kinds model of mud agitator and mud guns, and the price is much reasonable. If you have requirements please contact us freely.

23May 2019

Supply lower price of DCNJQ Series Mud Gun

⋅ Leave a Comment

DCNJQ Series Mud Gun is a bottom type mud gun, the Mud guns are meant to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center.

To be as a top supplier we can Manufacture 2′inch and 3′ inch size low and high pressure mud gun for option, mud mixing gun length can be customized, fixed nozzle or rotating nozzle. Mud gun fit for mud tank.

mud gun

All mud guns are equipped with handles and swivel joints as illustrated, permitting 360° rotation. Length should, in all instances, be specified when ordering.

Mud guns are usually used along with agitator. That means, almost every compartment on tank will request a mud gun. And there are bottom type mud gun, pivot type mud gun, and non spin type mud gun. For mud gun nozzle, there are 1 or 3 as options.

15Aug 2018

What functions of mud guns used in solid control system

⋅ Leave a Comment

Mud Gun is used in the solids control system of the drilling rig. The tool is chiefly used to mix the drilling mud in circulatory system and prevent mud from precipitating.

The mud gun has a simple structure that offers a flexible operation and is easy to be used. The mud gunis commonly used to defend against the precipitates in the solids control system. Mud Guns are available with handles, which make it easier to rotate the unit on its integrated 360° swivel joint.

mud guns

The number of mud gun depends on the size of tank. Usually mud gun installed with mud line of mud tank. According the inlet pipe size, there are 2’ mud gun and 3’ mud gun for option. According to different structure feature, there are two types of mud gun: fixed mud gun , and rotary mud gun.

All products purchased in our company are guaranteed to keep in good repair for one year. If quality problems happen in guarantee period, our company will maintain for free.

19Jun 2018

Mud guns shipped to China port

⋅ Leave a Comment

Mud guns are meant to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center.

IMG_0466

Last week. DC Solid control shipped 16 pcs mud guns for a foreign clients and already shipped to a China port. DC’s mud guns are light weight, small footprint and easy transportation. Especially, the nozzle can rotate 360° which can affuse mud into mud tank regularly. Other features include a 360° rotating swivel, and the ability to be customized to any length.

mud guns

The drilling fluid mud gun is my company independent design and production, make the solid control system perfect combination, the work coordination so that the whole
solid control system into a unified whole.

If you have interest, please feel free to contact us.

20Apr 2018

DC Solid control machinery shipped 90 pcs mud guns for pakistan

⋅ Leave a Comment

After came back from CIPPE exhibition, DC Solid control got the order for 90pcs mud guns. And now have parts mud gun prepared to deliery to the XinGang Port.

DCNJQ Series Mud Gun is a bottom type mud gun, the Mud guns are meant to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center.

mud gun

DC Mud Guns also produce flow currents, which boost fluid movements and aid in the suspension or mixing of particles. In addition, Mud Guns can create an alternate product flow when used in conjunction with agitators.

mud guns

We should know the tank depth or dimension should be specified. When mud guns are used as the primary agitation on a tank, we suggest that the mud gun be mounted in the middle of a 10′ x 10′ or smaller compartment. In larger compartments another mud gun should be added for every additional 10 feet.

23Sep 2016

2 Models of drilling mud gun from DC Solid control

⋅ Leave a Comment

Mud guns are an inexpensive solution to a potentially expensive problem. To be as professional manufacturer of mud guns, DC Solid control provides 2 models mud guns which are 2″ and 3″.

DC premium quality mud gun is considered to be one of the longest lasting on the market today. With a nozzle insert lined with engineered elastomer, the mud gun will not wear as easily as common steel inserts.

mud gun

Worrying less about the wear on mud guns means worrying less about the wear on mud pumps. Mission mud guns are an inexpensive solution to a potentially expensive problem. Other features include a collapsible handle, a 360˚ rotating swivel body, and the ability to be customized to any length, flanged or threaded.

mud guns

Mud Gun is designed and manufactured for the different drilling mud solids control system. The mud gun are classified into three kinds: low pressure; medium pressure; high pressure, mainly to match with centrifugal pump,or mud pump, or the shear pump. It is to clean the wall tube and to prevent the mud sediment in the mud tank.

If you have request of any types mud guns, please contact DC Solid control 

21Dec 2015

Customized Mud Gun For Pakistan Drilling Site

⋅ Leave a Comment

At the end of 2015. My repeat clients from Pakistand placed on urgently order of 16sets mud gun for their drill site. To meet the requirements urgently request, our workshop overtime to complete the order on time.

The mud gun used in oilfield is used to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size. They are best used in the drilling fluids circulation mud tank corners to keep solids from settling with a drilling fluid mud agitator is placed in the tank center. The mud gun is connected to a pump to circulate the drilling mud and prevent the solids from settling in the mud tank.

drilling mud gun

The oilfield drilling mud gun in the drilling fluids system is also used to transfer drilling fluids from compartment to compartment, like for trip tank compartment. Furthermore, it is usually used together with mud agitator. The mud agitator is used in the middle of the tank while the mud gun is placed in the corner of the tank.

mud guns

DC Solid control Customized Mud Guns are available for rotation adjustment to allow the operator to optimize the mud guns performance. The replaceable wear resistant jet nozzle is used, which is special design with better shearing.

15May 2015

Classification of drilling mud guns

⋅ Leave a Comment

Mud gun, also called drilling mud gun, is the professional tool of oil drilling fluid solids control equipment, mainly for the mud system; The impetus of mud gun can come from either centrifugal pump or mud pump . Making use of high speed drilling fluid flow stir well mud pit to prevent precipitation.

The stationary mud gun is same as the water power agitating pipeline which is in the tank, the different is the mud gun is installed to the opposite angles which is from 200mm with bottom tank, nozzle direction is parallel with the length ways tank of circulating tank. It can form the tank drilling fluids level rotary. It can guarantee drilling fluid convection.

mud guns

Jet pipe is end pipe, the end of pipe has nozzle. The high speed fluid is discharged from nozzle, after low speed switches the pressure, near the nozzle portal produce low pressure area, the low pressure absorb the fluid into jetting fluid, it is same as jet mixer.

The rotation type mud gun is made of input pipe, gun, crosshead, two bend with nipple, interchangeable nozzle and two box nuts, the mud is connected with input tube by ball-bearing. After drilling fluid through input pipeline, the mud gun, crosshead and nozzle opposite rotate with a certain speed. The rotary is decided b drilling fluid pressure, density and viscosity.

13Jun 2014

Drilling mud gun supplier

⋅ Leave a Comment

Mud gun is divided into high pressure and low pressure the two types, the displacement of high pressure mud gun is small, the pressure is big, it is provided liquid for drilling pump.

Mission mud guns are an inexpensive solution to a potentially expensive problem. Other features include a collapsible handle, a 360? rotating swivel body, and the ability to be customized to any length, flanged or threaded. Mud guns are usually placed about 6 inches (~15 cm) from the tank bottom and typically come with a 360° swivel that allows directional positioning to stir dead spots. Dead spots can occur in right-angle compartments that have inadequate mechanical agitation or can be caused by piping or other mechanical obstructions.

Mud gun

Advantages

1 In the premise of meet the requirements of pump power can use the drilling pumps.
2 The cost of drilling fluid gun is lower than mechanical agitator.
3 The weight is lighter than mechanical agitator.
4 It can improve the rate of shearing.
5 The flow can concentrate in a location to decrease or eliminate the dead zone.

In drilling fluid solids control system, only use drilling mud gun is not enough for stirring, we also need mud agitator, but for the dead angle of mud tank, it is indispensable equipment. So please fell free to contact DC solid control to inquiry the drilling mud gun.