Category Archives: Jet Mud Mixer

Jet mud mixer is a separate equipment for drilling mud mixing separately or sit on mud tank skid. DCSL jet mud mixer is a unit used together with the solids control system for petroleum drilling and horizontal directional drilling(HDD). The unit includes one sand pump, one jet mixing hopper and one jet mixer that are installed in a base with pipe valves.

SONY DSC

The first important part centrifugal pump for jet mud mixer:

Centrifugal pump is the fluids supply for drilling mud mixing hopper. The pump size will be selected depending on mixed mud specification and mud flow mixing requirement. The centrifugal pump will work to transfer water or drilling mud with a suitable pressure. We will matched different model centrifugal pump according to different users’ requirements.

SONY DSC

The second important part mixing Hopper for Jet Mud Mixer:

Mixing hopper will work to collect drilling chemicals with a small table for operation. The drilling chemicals will goes into hopper together with water or drilling mud supplied by centrifugal pump. There are 4 inch and 6 inch mixing hopper for option depending on mixing mud flow requirement.

Please contact DC Solid control office to get more infor about jet mud mixer

Jet mud mixer is a separate equipment for drilling mud mixing separately or sit on mud tank skid. DC Solids Control build jet mud mixer with experience for oil & gas drilling, coal bed methane drilling, horizontal directional drilling and water well drilling.

jet mud mixer

Jet Mud Mixer includes one hopper, centrifugal pump and base. DCSLH series Jet Mud Mixer is special equipment to prepare and increase the drilling fluids weight by adding and mixing bentonite, change the fluid density, change the mud density, viscosity, and dehydration. The effect is more prominent matching with Shear Pump.

Features of jet mud mixer 
1. High mixing capacity.
2. Complete “dust-free” mixing of material from surge tank and sack slitting machine.
3. Able to handle high back-pressure.
4. Economical, simple, robust, reliable and wear-resistant.
5. Venturi-type jet mixer.

DC is an exporter of drilling fluids jet mud mixer.Our factory approval the ISO9001. DC solids control is the designed,selling,production,service and delivery of Chinese based manufacturer.We will provide the high quality jet mud mixer and best service.Your best jet mud mixer start from TR solids control.

Jet mud mixer is a combination of centrifugal pump and mixing hopper with pipeline. The mud mixer is scientifically designed to be the optimal solution for mixing of both mud bulk material and mud additive chemicals into the drilling fluid.

DC Machinery produced 3 sets jet mud mixer for a Kazakhstan clients who is a state-owned business in Kazakstan. We have 5 common models of the jet mud mixer, they are DCSLH150-50, DCSLH150-45, DCSLH150-35, DCSLH100-25, DCSLH100-25. The jet mud mixer euuipped different flow sand pump according to the whole drilling fluid volume.

Jet mud mixer

DC jet mud mixer is a unit used together with the solids control system for petroleum drilling and horizontal directional drilling(HDD). The unit includes one sand pump, one jet mixing hopper and one jet mixer that are installed in a base with pipe valves. It is safe and stable and can be moved conveniently. At the same time,we can make Twin-Jet Mud Mixer according to the user requirements.It is designed by DC solids control bentonite mud mixer,drilling mud tank jet mixer.

drilling mud mixer

Combining with venturi tube and original jet nozzle, DC’s new Jet mud mixer specializes in simple structure and easy manipulation which can satisfy the drilling fluid’s need on weighting and compounding from 1500m to 9000m depth. DC’s jet mud mixer can be customized to be double jet mud mixer based on customer’s need.

Jet mud mixer is an important solids control equipment to prepare and increase the drilling fluids weight by adding and mixing bentonite, change the fluid density, change the mud density, viscosity, and dehydration.

DC Machinery shipped 3 sets the ordinary model of jet mud mixer to Russian this morning. The jet mud mixer combined with a sand pump(or many sets) and a Jet mixing hopper(or many sets), connected by manifold and valve then installed on a base. Aggravated hopper and sand pump can be connected by manifold and valve, or installed separately.

jet mud mixer

The sand pump with 240m3/h flow and whose model is DCSB6X5-13 and equipped 55kw explosion-proof motor. Combining with venturi tube and original jet nozzle, DC’s new Jet mud mixer specializes in simple structure and easy manipulation which can satisfy the drilling fluid’s need on weighting and compounding from 1500m to 9000m depth.

mixer

DC’s jet mud mixer can be customized to be double jet mud mixer based on customer’s need. Buy drilling cuttings jet mud mixer from China manufacturer. China leading technology,100% Quality Control,Best pirce,Reliable service.Your best hydraulic bentonite mud mixer,drilling mud tank jet mixer deal starts here.

Mud mixing hopper is a spare parts of solid control system. DC Mud Mixer/Hopper is scientifically designed to be the optimal solution for mixing of both mud bulk material and mud additive chemicals into the drilling fluid.

The unit has an optional plenum chamber to collect material flow from different sources, such as the surge tank, sack slitting machine and manual sack slitting table.

mud hopper producer

The mud hopper can be supplied in either manual or automatic versions according to your project requirements. The automatic version is equipped with overflow andbackflow prevention. A level switch, located in the hopper halts dosing of powder when at maximum level. Pressure transmitters (supplied as loose items) close the dry powder inlet valve when delta pressure falls.

mud hopper

The rugged design, in stainless steel, (AISI 316) allows for the use of the mud hopper for harsh offshore environments. Our mud hopper meets all relevant offshorehealth, safety, security and environment requirements. If you have requirements, please contact DC office.

Mud mixing hopper are widely used in HDD(horizontal directional drilling) and oil gas drilling for bentonite mixing.Mud Mixing unit is combination of drilling mud hopper and centrifugal pumps,it’s mixing force comes from the centrifugal pump.

mud hopper

DC Solid control manufactures four (4) inch and six (6) inch mud hoppers with standard flow rates from 130 GPM to 830 GPM, primarily used for shearing hard to mix additives. Over 10 years of application experience, extensive engineering design, and rigorous testing have produced the best possible mud hopper assembly.

The DC Mud equipmet range of mud mixing hoppers delivers safe, accurate and reliable mud mixing for both on- and off-shore applications. Design of the hopper is focused on key safety and usability features such as dust-free operations, interfacing abilities and remote or manual control options.

DC Solid control can assist with properly sizing a mud hopper to fit your system. There is no reason to be forced to mount the hopper on top of the mud tanks since the jet-venturi allows for convenient location of the hopper. Sizing assistance should be requested when extensive piping or elevation is planned for the downstream side of the hopper.

Jet mud mixer(mud mixing hopper) is the equipment to match with the drilling solids control equipments, regularly used to mix and adjust the proportion of drilling fluid, changing the density and viscosity etc.

The effect is more prominent matching with Shear Pump. The unit includes one sand pump, one jet mixing hopper and one jet mixer that are installed in a base with pipe valves.I t is safe and stable and can be moved conveniently.

jet mud mixer

The hopper design along with the venturi mixer ensures that clogging and build up of chemicals is avoided. Upstream of the mixing eductor a stream is diverted to a radial premixer above the mixer inlet. Powder chemicals are pre-wetted in the radial pre-mixer before entering the venture stream in the eductor, thus eliminating “fish-eyes” and microgels.

The mud hopper is powered by a centrifugal pump that flows the mud at high velocity through a venturi nozzle (jet) below the conical-shaped hopper. Dry materials are added through the mud hopper to provide dispersion, rapid hydration and uniform mixing. Liquids are sometimes fed into the mud by a hose placed in the hopper.

At the same time,DC we can make Twin-Jet Mud Mixer according to the user requirements.It is designed by DC solids control bentonite mud mixer,drilling mud tank jet mixer.

Really a beautiful snowy day, I took a picture of the jet mud mixer manufacture for foreign this morning. Although is very cold, but I felt very happy to see my sales records.

2016 has come to an end,and 2017 will coming. In the past year, DC Solid control has very good sales performance in oilfild, wastewater process, HDD, CBM and ect. Recent days, I will making a plan for 2017.

jet mud mixer

DC Machinery is a company focuses on solids control systems’ production, sales and after-sales maintenance service. DC Solids Control systems include all kinds of mud cleaning equipments with high quality, such as mud shale shaker, mud cleaner, mud centrifuge, mud agitator, etc.

If you have any interest of it, please directly contact adela to get our update catalogue and biggest discount.

Drilling fluid Mixer for drilling mud treatment is foundation engineering. Jet Mud mixer is special equipment to prepare and increase the drilling fluids weight by adding and mixing bentonite, change the fluid density, change the mud density, viscosity, and dehydration.

SONY DSC

DC Solid control to be as the Asia famous producer has a complete line of mud mixing equipment designed to assist operators with the greatest available efficiency in blending. Bentonite, polymers and other powder additives have traditionally been added to assist in achieving the properties needed from drilling mud.

SONY DSC

Detailed introduction of the mud mixer as below:

1. Hoppers can be Venturi hopper.
2. Ideal design on sufficient working pressure make pumps higher performance.
3. New style with better feasibility under different working condition.
4. Meet drilling fluids weighting demand for 1500m ~ 9000m well drilling.
5. Hopper and pump connected with pipelines. More flexible on hopper and pump quantities.
6. Centrifugal pump is mechanical seal type. Reliable and durable.
7. Easy to operate and maintain.

The drilling fluid mixer includes one sand pump, one jet mixing hopper and one jet mixer that are installed in a base with pipe valves. It is safe and stable and can be moved conveniently. At the same time, we can make Twin-Jet Mud Mixers according to the custom requirements.

Jet mud mixer is an important equipment in solid control system. DC Designed varies flow jet mud mixer for choosing.

jet mud mixer is used for configuring and aggravating the drilling fluid, changing its density, viscosity and PH. It is combined with a sand pump(or many sets) and a Jet mixing hopper(or many sets), connected by manifold and valve then installed on a base. Aggravated hopper and sand pump can be connected by manifold and valve, or installed separately.

jet mud mixer

DC Designed Jet Mud Mixer Features & Benefits:

1. Mud Mixer is a single jet mixer combined with 45 KW ( or 55 KW ) sand pump and a jet mud hopper or a double jet mixer of two pumps and two hoppers.
2. The weighting hopper can be combined with a pump or be used independently with pump connected together by manifold valve.
3. Put the drilling fluids materials ( bentonites, barite powder ) and the corresponding chemical additives ( polymer ) into circulation tank for increasing  the total.

DC’s jet mud mixer specializes in faster speed, reliable performance and long life. Welcome to your active inquires.